The tough and reliable Fleck 5600 control valve for filters and softeners can handle flow rates up to 20 gallons per minute and is made to provide the backwash capacity for softeners up to 12" in diameter and filters up to a 10" diameter.
We offer timer valves, which feature an easy-to-program timer that controls regeneration of the filter or softener, as well as metered valves, which measure the flow of water to determine regeneration cycles. The metered valves come in the standard Econominder style, which uses a mechanical face and is programmed with knobs and buttons, and the SE, or Simple Electronics style, which uses electronic programming. More details upon request.
Valves come without a yoke or bypass. If you need a yoke or bypass, order from the chart below.
Valve Material: | Noryl |
Inlet/Outlet: | 3/4" or 1" Female Pipe, with bypass or yoke |
Softening Cycles Provided: | Preliminary rinse, backwash, brine and slow rinse, rapid rinse, settling rinse and brine tank refill, and service. |
Drain Line Dimensions: | 1/2" |
Brine Line: | 3/8" |
Height from top of tank: | 7" |
Mounting Base: | 2 1/2" |
Working Pressure: | 20 to 125 psi. |
Working Temperature: | 34 to 110 degrees F. |
Backwashing filter timer valve with electronic programming.
Metered softener valve with electronic programming. Measures the flow of water to determine regeneration cycles.
Plastic yoke ending in 3/4" male NPT, for Fleck 5600 and 2510 filters.
Plastic yoke ending in 1" male NPT, for Fleck 5600 and 2510 filters.
Metal bypass valve ending in 3/4" Female NPT, for Fleck 5600 and 2510 filters.
Metal bypass valve ending in 1" Female NPT, for Fleck 5600 and 2510 filters.
Parts for Fleck Control Valves, including softener piston assembly kits, filter piston assemblies, low water pistons, seal and spacer kits, and drive motors.
Accessories for Fleck Control Valves, including yokes, bypasses and media funnels.
(whole house & well units)